Просмотр

[[Категория:Cisco]]
=Cisco ISG: учет траффика по сервисам=
==radacct==
Посмотрев на Acct-пакеты, вижу много полей, которых нет в классической таблице radacct
<PRE>
 Accounting-Request packet from host 172.16.32.117:1646, id=244, length=219
        Acct-Session-Id = "C345F4010000B2B1"
        Cisco-Service-Info = "NPREPAID_INTERNET"
        Framed-Protocol = PPP
        Framed-IP-Address = 195.69.244.194
        Cisco-AVPair = "parent-session-id=C345F4010000B2B0"
        User-Name = "195.69.244.194"
        Acct-Status-Type = Start
        NAS-Port-Type = Virtual
        Cisco-NAS-Port = "0/0/1/613"
        NAS-Port = 0
        NAS-Port-Id = "0/0/1/613"
        Service-Type = Framed-User
        NAS-IP-Address = 172.16.32.117
        Event-Timestamp = "Jan 15 2009 21:23:43 EET"
        NAS-Identifier = "router.ua"
        Acct-Delay-Time = 0
</PRE>

<PRE>
Accounting-Request packet from host 172.16.32.117:1646, id=253, length=281
        Acct-Session-Id = "C345F4010000B2B1"
        Cisco-Service-Info = "NPREPAID_INTERNET"
        Framed-Protocol = PPP
        Framed-IP-Address = 195.69.244.194
        Cisco-AVPair = "parent-session-id=C345F4010000B2B0"
        User-Name = "195.69.244.194"
        Cisco-Control-Info = "I0;45360"
        Cisco-Control-Info = "O0;36319"
        Acct-Input-Packets = 540
        Acct-Output-Packets = 427
        Acct-Input-Octets = 45360
        Acct-Output-Octets = 36319
        Acct-Session-Time = 541
        Acct-Status-Type = Interim-Update
        NAS-Port-Type = Virtual
        Cisco-NAS-Port = "0/0/1/613"
        NAS-Port = 0
        NAS-Port-Id = "0/0/1/613"
        Service-Type = Framed-User
        NAS-IP-Address = 172.16.32.117
        Event-Timestamp = "Jan 15 2009 21:32:44 EET"
        NAS-Identifier = "router.ua"
        Acct-Delay-Time = 0

</PRE>

В то время как 
<PRE>
mysql> describe radacct;
+----------------------+-------------+------+-----+---------------------+----------------+
| Field                | Type        | Null | Key | Default             | Extra          |
+----------------------+-------------+------+-----+---------------------+----------------+
| RadAcctId            | bigint(21)  | NO   | PRI | NULL                | auto_increment |
| AcctSessionId        | varchar(32) | NO   | MUL |                     |                |
| AcctUniqueId         | varchar(32) | NO   | MUL |                     |                |
| UserName             | varchar(64) | NO   | MUL |                     |                |
| Realm                | varchar(64) | YES  |     |                     |                |
| NASIPAddress         | varchar(15) | NO   | MUL |                     |                |
| NASPortId            | varchar(15) | YES  |     | NULL                |                |
| NASPortType          | varchar(32) | YES  |     | NULL                |                |
| AcctStartTime        | datetime    | NO   | MUL | 0000-00-00 00:00:00 |                |
| AcctStopTime         | datetime    | NO   | MUL | 0000-00-00 00:00:00 |                |
| AcctUpdateTime       | timestamp   | NO   |     | CURRENT_TIMESTAMP   |                |
| AcctSessionTime      | int(12)     | YES  |     | NULL                |                |
| AcctAuthentic        | varchar(32) | YES  |     | NULL                |                |
| ConnectInfo_start    | varchar(50) | YES  |     | NULL                |                |
| ConnectInfo_stop     | varchar(50) | YES  |     | NULL                |                |
| AcctInputOctets      | bigint(20)  | YES  |     | NULL                |                |
| AcctOutputOctets     | bigint(20)  | YES  |     | NULL                |                |
| CalledStationId      | varchar(50) | NO   |     |                     |                |
| CallingStationId     | varchar(50) | NO   |     |                     |                |
| AcctTerminateCause   | varchar(32) | NO   |     |                     |                |
| ServiceType          | varchar(32) | YES  |     | NULL                |                |
| FramedProtocol       | varchar(32) | YES  |     | NULL                |                |
| FramedIPAddress      | varchar(15) | NO   | MUL |                     |                |
| AcctStartDelay       | int(12)     | YES  |     | NULL                |                |
| AcctStopDelay        | int(12)     | YES  |     | NULL                |                |
| XAscendSessionSvrKey | varchar(10) | YES  |     | NULL                |                |
+----------------------+-------------+------+-----+---------------------+----------------+
</PRE>
Для атрибутов
<PRE>
Cisco-Service-Info = "NPREPAID_INTERNET"
Cisco-AVPair = "parent-session-id=C345F4010000B2B0"
Cisco-NAS-Port = "0/0/1/613"
NAS-IP-Address = 172.16.32.117
Event-Timestamp = "Jan 15 2009 21:23:43 EET"
NAS-Identifier = "router.ua"
</PRE>
нет места ни в таблице ни в запросе, вносящим данные.

sql.conf:
<PRE> 
...
accounting_update_query = " \
 UPDATE ${acct_table1} \
  SET \
   FramedIPAddress = '%{Framed-IP-Address}', \
   AcctSessionTime     = '%{Acct-Session-Time}', \
   AcctInputOctets     = '%{Acct-Input-Gigawords:-0}'  << 32 | \
                         '%{Acct-Input-Octets:-0}', \
   AcctOutputOctets    = '%{Acct-Output-Gigawords:-0}' << 32 | \
                         '%{Acct-Output-Octets:-0}' \
  WHERE AcctSessionId = '%{Acct-Session-Id}' \
    AND UserName        = '%{SQL-User-Name}' \
    AND NASIPAddress    = '%{NAS-IP-Address}'"
</PRE>
Соответвенно, следует дополнить radacct  нужными полями и исправить запросы.

==SQL - запросы==
Таблица radacct (добавлено 2 поля EventTimestamp и CiscoServiceInfo)
<PRE>mysql> describe radacct;
+----------------------+--------------+------+-----+---------------------+----------------+
| Field                | Type         | Null | Key | Default             | Extra          |
+----------------------+--------------+------+-----+---------------------+----------------+
| RadAcctId            | bigint(21)   | NO   | PRI | NULL                | auto_increment |
| AcctSessionId        | varchar(32)  | NO   | MUL |                     |                |
| AcctUniqueId         | varchar(32)  | NO   | MUL |                     |                |
| UserName             | varchar(64)  | NO   | MUL |                     |                |
| Realm                | varchar(64)  | YES  |     |                     |                |
| NASIPAddress         | varchar(15)  | NO   | MUL |                     |                |
| NASPortId            | varchar(15)  | YES  |     | NULL                |                |
| NASPortType          | varchar(32)  | YES  |     | NULL                |                |
| AcctStartTime        | datetime     | NO   | MUL | 0000-00-00 00:00:00 |                |
| AcctStopTime         | datetime     | NO   | MUL | 0000-00-00 00:00:00 |                |
| AcctUpdateTime       | timestamp    | NO   |     | CURRENT_TIMESTAMP   |                |
| AcctSessionTime      | int(12)      | YES  |     | NULL                |                |
| AcctAuthentic        | varchar(32)  | YES  |     | NULL                |                |
| ConnectInfo_start    | varchar(50)  | YES  |     | NULL                |                |
| ConnectInfo_stop     | varchar(50)  | YES  |     | NULL                |                |
| AcctInputOctets      | bigint(20)   | YES  |     | NULL                |                |
| AcctOutputOctets     | bigint(20)   | YES  |     | NULL                |                |
| CalledStationId      | varchar(50)  | NO   |     |                     |                |
| CallingStationId     | varchar(50)  | NO   |     |                     |                |
| AcctTerminateCause   | varchar(32)  | NO   |     |                     |                |
| ServiceType          | varchar(32)  | YES  |     | NULL                |                |
| FramedProtocol       | varchar(32)  | YES  |     | NULL                |                |
| FramedIPAddress      | varchar(15)  | NO   | MUL |                     |                |
| AcctStartDelay       | int(12)      | YES  |     | NULL                |                |
| AcctStopDelay        | int(12)      | YES  |     | NULL                |                |
| XAscendSessionSvrKey | varchar(10)  | YES  |     | NULL                |                |
| EventTimestamp       | varchar(64)  | NO   |     |                     |                |
| CiscoServiceInfo     | varchar(255) | NO   |     |                     |                |
+----------------------+--------------+------+-----+---------------------+----------------+
</PRE>

Запросы связанные с аккаунтингом (уже с изменениями)

<PRE>


accounting_update_query = " \
 UPDATE ${acct_table1} \
  SET \
   FramedIPAddress = '%{Framed-IP-Address}', \
   AcctSessionTime = '%{Acct-Session-Time}', \
   AcctInputOctets = '%{Acct-Input-Gigawords:-0}'  << 32 | '%{Acct-Input-Octets:-0}', \
   AcctOutputOctets = '%{Acct-Output-Gigawords:-0}' << 32 | '%{Acct-Output-Octets:-0}', \
   EventTimestamp       = '%{Event-Timestamp}', \
   CiscoServiceInfo     = '%{Cisco-Service-Info}' \
 WHERE \
  AcctSessionId = '%{Acct-Session-Id}' \
  AND UserName        = '%{SQL-User-Name}' \
  AND NASIPAddress    = '%{NAS-IP-Address}'"
</PRE>

<PRE>
 accounting_start_query = " \
  INSERT INTO ${acct_table1} \
   ( \
    AcctSessionId, \
    AcctUniqueId, \
    UserName, \
    Realm, \
    NASIPAddress, \
    NASPortId, \
    NASPortType, \
    AcctStartTime, \
    AcctStopTime, \
    AcctSessionTime, \
    AcctAuthentic, \
    ConnectInfo_start, \
    ConnectInfo_stop, \
    AcctInputOctets, \
    AcctOutputOctets, \
    CalledStationId, \
    CallingStationId, \
    AcctTerminateCause, \
    ServiceType, \
    FramedProtocol, \
    FramedIPAddress, \
    AcctStartDelay, \
    AcctStopDelay, \
    XAscendSessionSvrKey, \
    EventTimestamp , \
    CiscoServiceInfo \
   ) \
  VALUES \
   ( \
    '%{Acct-Session-Id}', \
    '%{Acct-Unique-Session-Id}', \
    '%{SQL-User-Name}', \
    '%{Realm}', \
    '%{NAS-IP-Address}', \
    '%{NAS-Port}', \
    '%{NAS-Port-Type}', \
    '%S', \
    '0', \
    '0', \
    '%{Acct-Authentic}', \
    '%{Connect-Info}', \
    '', \
    '0', \
    '0', \
    '%{Called-Station-Id}', \
    '%{Calling-Station-Id}', '', \
    '%{Service-Type}', \
    '%{Framed-Protocol}', \
    '%{Framed-IP-Address}', \
    '%{Acct-Delay-Time:-0}', \
    '0', \
    '%{X-Ascend-Session-Svr-Key}', \
    '%{Event-Timestamp}', \
    '%{Cisco-Service-Info}' \
   )"
</PRE>
==Сервисы==
Каждый сервис для которого планируется вести учет траффика должен иметь в своем описании следующие  атрибуты:
<PRE>
Cisco-AVpair += "subscriber:accounting-list=LIST-NAME"
Acct-Interim-Interval = 60
</PRE>

LIST-NAME - предварительно сконфигурирован на роутере.

В моем случае это
<PRE>
Cisco-AVpair += "subscriber:accounting-list=ISG-AUTH-1"
</PRE>

<PRE>
!
aaa group server radius ISG-RADIUS
 server 172.16.30.144 auth-port 1812 acct-port 1813
!
...
!
aaa accounting update periodic 1 jitter maximum 0
aaa accounting network ISG-AUTH-1 start-stop group ISG-RADIUS
!
</PRE>
Acct-Interim-Interval  не может быть менее 60 сек. (больше -может быть).


Соответвенно сервис (например) KH-IX  приобретает вид
<PRE>
KH-IX_5_MBIT    Password == "cisco"
                Cisco-AVPair += "ip:traffic-class=in access-group 194 priority 8",
                Cisco-AVPair += "ip:traffic-class=out access-group 194 priority 8",
                Cisco-AVpair += "subscriber:accounting-list=ISG-AUTH-1",
                Acct-Interim-Interval = 60,
                Cisco-Service-Info += "QU;5120000;2048000;D;5120000;2048000"
</PRE>

==Результат учета==
<PRE>
mysql> select AcctInputOctets,AcctOutputOctets,CiscoServiceInfo from radacct where UserName='123.123.244.195' and AcctStopTime>0;
+-----------------+------------------+------------------+
| AcctInputOctets | AcctOutputOctets | CiscoServiceInfo |
+-----------------+------------------+------------------+
|          200088 |           196850 | NWORLD_1_MBIT    |
|          761253 |         11253195 | NUA-IX_2_MBIT    |
|               0 |                0 | NKH-IX_5_MBIT    |
+-----------------+------------------+------------------+
3 rows in set (0.00 sec)
</PRE>